v0.12.9 is live. Three new parts in the 2D lab:
• ESP32 DevKit — full GPIO/analog/3V3
• Raspberry Pi Pico — GP0..GP15 + VBUS + 3V3
• Hobby servo — rotating arm follows the position prop 0..180°
Plus: the DC motor actually spins in the sim now (direction follows current polarity, speed scales with amps).
Built a demo that uses all of it — ESP32 driving a servo with a status LED. Five parts, twenty lines of code. Full walkthrough: @L/exosynk/esp32-servo-sweep
Or just Get a free forkable copy: @exosynk/esp32-servo-sweep
Tutorial
Your first ESP32 build: a servo that sweeps
@exosynk
Five parts and twenty lines of code. How the ESP32 talks to a hobby servo, why the status LED lives on GPIO23, and how to verify every wire in the sim before you touch hardware.
0 stars149 views
Project
ESP32 servo sweep with status LED
@exosynk
A 5-part starter project using the new ESP32 DevKit + hobby servo. GPIO18 drives servo signal, GPIO23 lights a status LED while the code is running.
0 stars